Menvier Security TS700 Bedienungsanleitung PDF herunterladen (Seite 5)

4. Part Setting using Part Set Codes

Ensure that all monitored areas are secured. Enter your

passcode, the exit sounder will make a continuous tone. If

required leave via the norma l exit route and close the final exit

door, (pressing the Exit Terminator button if fitted). The system is

part set when the exit sounder stops, the display will al ternate

betweenthe group/areawhich hasbeen armedandthecurrent

time.

5. Setting with Circuits Omitted

It may sometimes be desirable to omit a circuit when full or part

setting the system.

1. Enter your passcode (users 1-9) and press [ within 5

seconds.

2. Press 7 and the display will show the circuit number

followedbyitsomitstatus.N=notomitted andY= omitted.

3. Press0 tochangethestatusofthe circuit and[ to confirm

the change. A low tone will indicate that the circuit cann ot

be omitted or a high pitch multi-tone i ndic ates that the

change has been accepted. Continue with the next circuit

if required.

4. Press] toquitto“u sermenu 1"and conti nue wit h settin g by

pressing0 for full-setor A or B or C for part-set(see 2 and

3).

6. Silent Setting

The system c an be full set or part set silently except for the final

system set sound. Enter your passcode (users 1-9) and for fullset

press 8 within 5 seconds. For part set press A or B or C then

press 8 .

Alternatively

Enter yo ur passcode (users 1-9) and press [ within 5 seconds.

Press 8 and the di splay will show "SILENT -". En ter 0 for silent full

set or A or B or C for silent part set.

7. Setting and Unsetting With a Keyswitch

Opera tethekeyswitch (ordoor lo ck) and leave via theexit route.

The syste m will be full set or part set when the exit sounder stops.

To unset the system, operate the keyswitch (or lock) again.

TS700 Sta rburst User Operating Instructions

0015

User passcode B entered.

Group/area B will set in 15

seconds.

SET

Group/area B is now armed.

USER 1-

“User menu 1" selected.

CCT 01 - N

Circuit 01 will not be omitted.

CCT 01 - Y

Press [0] to change the status.

Circuit 01 will now be omitted.

SILENT -

Press [0] for silent full set or [A] or

[B] or [C] for si lent part set.

USER 1 -

“User menu 1" selected.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Menvier Security TS700 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Menvier Security TS700