Menvier Security TS900+ Bedienungsanleitung PDF herunterladen (Seite 15)

Unsetting After An Alarm

If an alarm has occurred whilst the alarm system is full or part-set, the display will indicate the

detection circuit that was triggered when the system is unset. Once the cause of the alarm has

been established the system must be reset (see “Resetting after an alarm”).

1. Enter the premises or area via the

prescribed entry route and proceed directly

to the remote keypad. The internal sounders

will generate an interrupted tone. The

display will show how much time you have

left, e.g.,

2. Enter your passcode XXXXwithin

the entry time. The internal sounders will stop

and the display will show the detection

circuit that caused the alarm, e.g.,

3. Refer to “Resetting after an Alarm”

If “Circuit Text” has been programmed then the display on the LCD and Starburst remote

keypads will alternate between the “Circuit number” and the “Circuit Text” at step (2).

Resetting After An Alarm

The installation company will have programmed the system to be either “User Reset”, “Engineer

Reset” or “Remote Reset”, consult your installation company if you are not sure.

User Reset

From step (3) of “Unsetting After An Alarm” proceed follows:

1. Enter your passcode XXXX. The

display will show:

2. Within 5 seconds press ]. The display

will show:

3. After 5 seconds the “SYSTEM OPEN”

message will disappear and the display will

show the time, (date and banner text, LCD

only) e.g.,

Your alarm system is reset by: User: Engineer: Remote Reset:

(Continued Over)

TS790+ & TS900+ User Manual Operating The System

ALARM 03

09:45.59 28/04

ALARM 03

Enter Your Code

Time left > 0025

0025

Office Detector

09:45.59 28/04

OFFICE

Preparing to Set

Please Wait...

FUNCTION

Func

SYSTEM OPEN

08:30 Sun 28 Apr

OPEN

ABC Security

08:30 Sun 28 Apr

08.30

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Menvier Security TS900+ Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Menvier Security TS900+