Menvier Security TS900+ Bedienungsanleitung PDF herunterladen (Seite 5)

Overview

Introduction

The TS790+ and TS900+ are advanced security alarm control systems using state of the art

electronics to provide comprehensive but flexible protection for both domestic and

commercial premises. The system comprises a number of components linked to a central

control unit which is concealed from view but accessible for maintenance. The TS790+ can

monitor from 10 to 16 detection circuits where as the TS900+ can monitor a maximum of 56.

Both systems can be operated from up to four remote keypads which may be one of four types.

Detection devices such as door contacts or movement sensors are allocated to detection

circuits which are identified on the remote keypad displays. All detection circuits may then be

allocated to the whole system or grouped into “Wards” (areas) so that access to certain areas

can be controlled independently.

A modem can also be connected to the alarm system via the telephone line to allow remote

interrogation, programming and resetting of alarms. This feature is known as “Downloading” and

is normally performed by the installation company or central station.

Each alarm installation is specific to the site and its occupier and may differ from other

TS790+/TS900+ installations. This manual describes in detail all the functions and procedures

available to the user, however, not all these may be relevant to the way your system is set up. To

avoid unnecessary operating errors please discuss the details of the alarm system with your

installation company before attempting to use it. Also ensure that the installation company

completes the system record sheets at the back of this manual and fills in the details required

within the section called “Operating The System”.

TS790+/TS900+ User Manual Overview

1 2 3 4 5 6 7 8 9 10 ... 56 57

Keine Kommentare

Menvier Security TS900+ Bedienungsanleitung Seite 5