Menvier Security TS900+ Bedienungsanleitung PDF herunterladen (Seite 34)

Configure Wards - 8

The TS790+ & TS900+ can be split into four wards:

System Ward (S)

Ward A

Ward B

Ward C

Each ward can then be assigned to a passcode or part-set button to allow flexible part-set

arrangements. See “Part Set Groups” on page 39 and “Code Set Groups” on page 40.

Only “Night”, “Final Exit” and “Exit terminator” circuit types can be assigned to wards A, B and C. All

other circuit types must remain in the system Ward. Circuits can be assigned to more than one

ward (System, A, B or C) thus creating overlapping areas. Circuits that are assigned to more than

one ward will only be armed when both or all wards are set. Note that this may mean that a user

who sets one ward may not realise that some circuits are unset because they are shared with

another unset ward, for example the system ward.

From the factory, all detection circuits are assigned to the system ward (i.e., they are not

assigned to wards A, B or C). Circuits that remain assigned to the system ward can also be set or

unset independently. See “Part Set Groups” on page 39 and “Code Set Groups” on page 40.

1. Ensure that “User menu 2" is selected.

Press 8 to select the Configure Wards

option. The display will show:

2. Enter the circuit number, e.g., for circuit

02 enter “02". The top line of the display

shows the circuit text (if programmed) and

the bottom line shows the wards that the

circuit are assigned to e.g.:

Note that if you do not press any keys

then after 5s the display changes to

show the first zone.

3. Select/de-select the wards by pressing:

A for “Ward A”

B for “Ward B”

C for “Ward C”

e.g., press “A” then “B” to assign circuit

02 to wards A and B. If a low tone is

generated when pressing the “A”, “B” or

“C”, then the selected circuit cannot

be programmed into wards.

4. Press [ to accept and repeat from step

2 for other circuits, when finished press ] to

abandon this option and return “User

menu 2".

User Menu 2 TS790+ & TS900+ User Manual

Store Room PIR

CCT 02 in [AB ]

CCT 02-A

02-A

Configure Wards

Enter CCT No.>- -

CCT 01-

01-

Store Room PIR

CCT 02 in [ ]

CCT 02-

02-

CCT 02-B

02-B

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Menvier Security TS900+ Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Menvier Security TS900+