Menvier Security TS900+ Bedienungsanleitung PDF herunterladen (Seite 30)

Setup Users (Cont.)

Set Only

Users 02-31 may be programmed as "Set Only". This user type allows

the alarm system to be set and access to "User menu 1".

Reset Only

Users 02-31 may be programmed as "Reset Only". This user type allows

24hr alarms to be reset and access to "User menu 1" option 1 to 9.

Duress

Users 02-31 can be programmed as "Duress". When this user type is

entered a silent "Panic Alarm" (i.e., Bell and sounders not triggered) is

transmitted to the central station via the telephone line and remote

signalling device (if fitted). The user will still be able to set and unset the

alarm system and access "User menu 1".

Note: All other user code types will generate a "Duress" alarm if the

passcode is entered with the first two digits reversed (e.g., for a

standard passcode of 2580 enter 5280 to generate a "Duress" alarm).

If required, this feature can be disabled by the installation company or

by making the first two digits of the passcode the same.

PA Code

Users 02-31 can be programmed as "PA Code". When this user type is

entered a "Panic Alarm"' is transmitted to the central station via the

telephone line and remote signalling device (if fitted). The external

sounder(s) and strobe light(s) are also activated.

Access

Users 02-31 can be programmed as "Access". When this user type is

entered any output that is programmed as `Access' will activate for a

pre-set time. Normally this user type is used in conjunction with an

electric door strike connected to the alarm system so that when the

passcode is entered the door strike is operated to allow the user

access into that area.

Full Set Group

Users 02-31 may be programmed as "Full Set Group". This user type

only allows the wards assigned by the installation company or master

user to be set and unset. This user type does not have access to any

user menus.

Code Set Group A

Users 02-31 can be programmed as "Code Set Group A". This user type

only allows the wards assigned by the installation company or master

user to be set and unset. This user type does not have access to any

user menus.

Code Set Group B

Users 02-31 can be programmed as "Code Set Group B". This user type

only allows the wards assigned by the installation company or master

user to be set and unset. This user type does not have access to any

user menus.

Code Set Group C

Users 02-31 can be programmed as "Code Set Group C". This user type

only allows the wards assigned by the installation company or master

user to be set and unset. This user type does not have access to any

user menus.

User Menu 2 TS790+ & TS900+ User Manual

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Menvier Security TS900+ Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Menvier Security TS900+